POLYESTER WEBBING SLING are manufactured in accordance with DIN EN 1492-1 and CE approved.
All range of webbing sling sizes from 1″ to 12″ with SWL ranging from 1 Ton to 24 Tonnes Rated Safe Working Load .
APPLICATION:
Steel pipes, steel wires, steel plates -
Product made of copper, lead, aluminium, and stainless steel -
Sculptures -
Machinery, Space parts -
Glasses, rubber, wooden, plastic, and paper products -
Plumbing, tree planting, stone handling -
Utility, Civil Engineering, dredging -
CAUTION:
Avoid overloading capacity -
Avoid placing 2 slings at the same hook -
Position correctly before use -
Avoid sharp edges when lifting -
Avoid vibration that may cause friction -
Total weight must be distributed equally -
Inspect weekly or more frequently -
Do not use when twisted -
Do not drag on the ground surface -
Do not use over 100 degree celcius temperature -
Store in a cool and dry place -
Never use damaged slings -
Permanent supervision required -
APLIKASI:
- Pipa besi, kawat besi, plat besi
- produk dari tembaga, kabel, aluminium dan stainless steel
- patung
- permesinan, suku cadang
- Kaca, karet, kayu, plastik, dan produk kertas
- Pipa, pohon, dan batu
- Bermacam penggunaan, teknik sipil, pengerukan
KEUNTUNGAN POLYESTER WEBBING SLING:
- Ringan dan lentur
- Tidak licin
- Tahan terhadap pelumas dan oli
- Tahan terhadap bahan kimia dan asam
- Faktor Keselamatan 8:1
PERINGATAN:
- Hindari pemakaian beban berlebih
- Hindari pemakaian 2 sling di hook yang sama
- Taruhlah di posisi yang benar sebelum di pakai
- Hindari sisi tajam dari beban yang di angkat
- Hindari hentakan yang bisa menyebabkan pergesekan
- Berat total beban harus dibagi sama rata
- Inspeksi webbing seminggu sekali atau sesering mungkin
- Jangan dipakai apabila terbelit
- Jangan diseret di permukaan tanah
- Jangan dipakai apabila suhu ruangan mencapai 100º selsius
- Simpan di tempat yang kering
- Jangan pernah memakai sling rusak
- Pengawasan permanen diperlukan
Available in Two-pieces assemblies with one fixed length and one adjustable length of webbing or endless assemblies (without end fittings)
Left: Short hancle ratchet width 25 & 50 mm, Right: Long handle ratchet width 50 mm